User`s manual

Software Preparations for Printing Preparing Your Printer for Printing
8-22 Sprinter User's Manual
The printer will print an Image in the specificed printing order of its tiles. For each
tiled Image, you must specify its tile printing order.
Collating the printing of two or more copies of a file
When checked, the Collating feature will ensure that when you are printing
two or more copies of the same file, all the tiles in the file are printed in
successive order for each copy.
If the feature is not checked, the first tile of the image will be printed for
each copy, then the second tile, etc., etc.
! To collate the printing:
• In the
EDIT dialog box, check the COLLATE option.
Activating the Flip feature
Although the COOLING SYSTEM prevents any color mismatch between slices,
activating the Flip feature will cause alternate tiles to be rotated 180°. This
will further help to prevent color mismatching.
! To activate the Flip feature:
• In the
EDIT dialog box, check the FLIP option.
Adjusting the Gray Level
The gray level can be adjusted for specific TIFF files. You can also use THE
GRAY LEVEL settings that have been saved previously.
You can adjust the G
RAY LEVEL on all the TIFF files using the PREFERENCES
dialog box (see Figure 8-21, page 8-28).
! To adjust the Gray level of a TIFF file:
1. In the
GRAY LEVEL ADJUSTMENT group box of the EDIT dialog box,
check the
ENABLE option.
2. Click
EDIT.
The
GRAY LEVEL dialog box appears as illustrated below.
3. Choose the color whose G
RAY LEVEL you wish to adjust.
4. Check the Smooth or linear option as required.
5. Pass the cursor over the grid lines and when it is located over the LUT
line, it changes to a cross hair shape.