User`s manual

Software Preparations for Printing Preparing Your Printer for Printing
8-20 Sprinter User's Manual
! To activate the Collector Motor:
• In the C
ONFIGURATION dialog box, check the COLLECTOR MOTOR option.
Changing the Energy Level
Setting the ENERGY level determines the intensity of the color to be printed.
! To change the Energy level:
• In the A
DVANCE CONFIGURATION dialog box, from the ENERGY box, select
or enter an E
NERGY level.
Factory recommended energy levels are:
18 – 24 for vinyl , 4 – 8 for paper, and 26 – 31 for banners.
Specifying the Print Settings
Figure 8-19: The Edit Dialog Box
Use the EDIT dialog box to specify the print settings.
You must select the required image in the M
AIN SCREEN before you begin
the editing process.
Clicking OK will close the E
DIT dialog box. So you may want to specify all
the required settings before clicking OK.
The procedures have been set out in the order that they appear in the E
DIT
dialog box.
Specifying the number of copies to be printed
! To specify the number of copies to be printed:
• In the
EDIT dialog box, select the required quantity in the COPIES drop-
down combo box.
Specifying the horizontal gap
If an image is narrow enough to fit in the substrate width more than once,
you can specify the gap between the images. If you have specified a gap
that is wider than the space available, the last image will be printed on the
next row.