User`s manual

Software Preparations for Printing Preparing Your Printer for Printing

8-16 Sprinter User's Manual

Deleting a Substrate Type

! To Delete a Substrate Type:

Figure 8-18: The Delete Config Window

1. From the CONFIGURATION dialog box, click Delete.

A window opens and prompts you to either confirm deletion or cancel.

(Figure 8-18).

2. Click OK to confirm the delete command.

You cannot delete a factory-set substrate type.

Selecting Active Printing Heads

! To select the Active Printing Heads:

1. From the M

AIN SCREEN, click CONFIG or from the UTILITIES menu, choose

ONFIGURATION. The CONFIGURATION dialog box appears (Error!

Reference source not found.).

2. In the H

EADS group box, check the ACTIVE HEAD boxes according to the

colors you wish to use.

Click a color for one of the following settings:

Piston Up and printing

Piston Up and not printing

Piston Down and not printing

If a particular Active Head is not selected, its motor remains inactive and no

data is sent to that head. When loading Substrate, the de-activated station

will not load.

Color name in Black

Color name in Gray