User`s manual

Preliminary Preparations for Printing Preparing Your Printer for Printing
8-2 Sprinter User's Manual
4. Ensure that the main electric switch is ON, and CIRCUIT BREAKER’S
button is pressed.
5. Ensure that the main electric switch is ON, and C
IRCUIT BREAKER’S
button is pressed.
Figure 8-2: The Main Screen
6. Switch on the Computer and invoke the program by double-clicking the
SprinterB icon.
The M
AIN SCREEN appears (Figure 8-2).
Make sure that the green lights on all H
EAD CARDS are lit. The HEAD
CARDS are located on top of the COOLING CHANNEL illustrated in
Figure 8-3, page 8-3, under which the P
RINT HEAD is located. If it is not
on, refer to the appendix on Troubleshooting at the end of this manual.
When the 24v power supply is activated, the yellow light on the Print Head
Card is lit.