User`s manual

Creating Log Files Updating the Software and User Service Code

7-2 Sprinter User's Manual

! To update the User Service Code:

1. From the U

TILITIES drop-down menu, select UPDATE SERVICE CODE. The

PDATE USER SERVICE CODE dialog box appears (Figure 7-1, page 7-1).

2. In the P

LEASE ENTER YOUR NEW SERVICE CODE field, paste or browse and

select, the user's code (provided by the dealer or Matan,) and click

PDATE.

The users' ribbon usage permission is updated with the total length of

each type of R

IBBON that they purchased with this code. The total

length of ribbon usage permission that you now have (including the

amount that might have remained from before the current update),

appears in the M

ETERS/FEET field of the dialog box. The relative totals

will decrease according to the quantity used during the printing

process.

If you are printing by the YMCK process, the remaining available amount of

Ribbon is the amount appearing in the Meters/Feet field of the Update User

Service dialog box, divided by 4.

Creating Log Files

The LOG file displays the data relating to all RIBBON transactions.

E.g., Updating inventory.

Log files can be created and viewed from the Sprinter application. They

may be used by Matan for references purposes.

! To create a Log File:

1. In the U

PDATE USER SERVICE CODE dialog box, click MAKE LOG FILE.

The following window opens and displays the location of the U

SER LOG

FILE.

2. Click OK.