User`s manual

Around the Windows The Utilities Menu
Sprinter User's Manual 6-13
Group Box Screen
Component
Description
Substrate
sensor
Check this option to activate the Substrate Sensor.
This option should not be checked if you are using a
transparent Substrate.
Run collector Check this option to run the Collector motor during printing.
Printing Energy The energy with which the Print Head prints the color on the
Substrate.
Select the Energy Level from the Drop-down list.
Factory recommended energy levels are:
4 – 8 for paper (dye sublimation), 18 – 24 for vinyl (resin), and
25 – 30 for banners (resin).
Ribbon type The type of Ribbon used – determined by the printing energy
level selected from the Printing energy drop-down list.
The Printing Head settings need only be set once for each substrate.
Once they are set, they will automatically be used when that particular substrate
is specified.
The Control Dialog Box
You access CONTROL DIALOG BOX by clicking CONTROL PANEL MENU from the
U
TILITIES menu or by clicking CONTROL in the MAIN SCREEN. You control
most of printing operations from this dialog box.
Figure 6-9: The Control Dialog Box