User`s manual

The Utilities Menu Around the Windows
6-12 Sprinter User's Manual
Group Box Screen
Component
Description
Delay Y (dots) To set the Print Head Delays. The reference is of the distance
in dots from each Print Head to the first one. The first Print
Head is therefore always referenced as zero. For initial
reference, the distance between each Print Head is about
4,000 dots. Other units of measure can be selected through
the Preference dialog box.
Shift X (dots) To set the first dot position from the right end of the printing
area.
Temperature
Control
Cooling System Click this option to activate the TCS.
You must then set the Open and Close Temperatures.
The Open setting refers to the temperature at which the valves
are opened and the Close setting refers to the temperature at
which the solenoids are closed. (The recommended settings
are: 32° Open and 30° Closed.)
Specific units of measure (ºC or ºF) can be selected through
the Preference dialog box.
See also Cooling Doors in the Control dialog box.
Auto adjust
before printing
to:
Clicking this option will cause the Print Heads to be
automatically heated to the specified temerature before
printing.
General Image Database
path
Specify the directory path where the files are situated, after
importing the Image.
Browse Click this button to browse for the required path.
Distance
between images
To set the length of white space between each printed slice
and Image.
Specific units of measure can be selected through the
Preference dialog box.
Print 4 color
lines
Check this option to print four color lines 0.5cm high, at 75%
strength, one from each color, across the width of the Print
Head after a specified number of images. This helps the
operator detect scratches on the Print Head.
Maximum print
width
Specify the maximum print width for the file (up to
902mm/35.51” for the 36” printer and 1016mm/40” for the 40”
printer).
Specific units of measure can be selected through the
Preference dialog box.
Advance
substrate before
print
With the system running, advance the substrate before
printing.
Advance
substrate after
print
With the system still running, advance the substrate after
printing stops.
Fine adjust
length
Fine tunes the length of the printed image, from –16 to +16
units.
Normally, this might change due to the varying properties of
different substrates. (E.g., if you print an image that is 100cm
long and the actual printing size is only 99.5cm, you have to
choose a higher number in the Fine adjust length drop-down
combo box.)