User`s manual

Around the Windows The Image Menu
Sprinter User's Manual 6-7
Group Box Screen
Component
Description
Collate Check this option to ensure that when printing two or more
copies off a file that is tiled, successive tiles of each copy are
printed (starting from Tile #1). The printer then prints the next
copy (starting from Tile #1), etc., etc.
Flip Click this button to activate the flipping feature.
When printing a very large image, in order to maintain color
consistency between the slices, the printer will flip each
alternate (even) slice through 180°.
Width The printed width of each slice. Print width can be set to one
decimal point for better accuracy.
The unit if measure can be specified in the Preferences dialog
box.
Overlap X To set the Slice Overlap. This overlap can be set to one
decimal point for better accuracy
From X To select the first slice to be printed, from the X axis.
To X To select the last slice to be printed from the X axis.
Height The printed height of each slice. Print height can be set to one
decimal point for better accuracy.
The unit if measure can be specified in the Preferences dialog
box.
Overlap Y To set the Slice Overlap. This overlap can be set to one
decimal point for better accuracy
From Y To select the first slice to be printed, from the Y axis.
To Y To select the last slice to be printed from the Y axis.
Grey level
adjustment
Enable Check this option to enable the grey level adjustment feature
for the selected Image.
For 50 dpi TIFF files only.
Edit Click this button to access the Grey Level dialog box.
Browse Click this button to browse for an existing Grey Level file.
Noise To disguise any repetitive errors that appear in the printing,
such as those resulting from bending, in 50dpi files only.
Serial Number Enable Optional feature. Enables you to print a serial number on the
image at a specified location, on top of whatever might be
printed.
Transparent Choosing this option will ‘clean’ the specified location in the
shape of the serial number, which will then be printed on the
Substrate.
C, M, Y, K To select the color in which the Serial Number will be printed.
From # To select the first number that is printed.
Offset X:
Offset Y:
The coefficient location.
The coefficient location.
General OK Click this button to acccept your settings and close the dialog
box.
Cancel Click this button to close the diaslog box without saving your
settings.
Help Click this button to access the online Help.