User`s manual

Installing the Software Installing the Software
Sprinter User's Manual 5-2
9. Click SAVE.
10. Save the zip file to the temp directory.
The download procedure starts.
11. When the download has been completed, extract the zipped file to a
convenient directory.
12. Double click the expanded .exe file.
The W
INZIP SELF-EXTRACTOR window opens.
13. Click S
ETUP.
The S
ETUP WIZARD is activated.
14. Follow the on-screen instructions.
15. Select the type of printer for which you are installing the software and
click OK.
If you have a previous NT setup version already installed on your
printer, you can move all your preset parameters (delay, shift, etc.,)
from the existing software to the new version, by click Yes in the
SELMODEL window as illustrated below.
The I
NSTALLATION window closes and the new software icon (Sprinter or
Spark) appears on your Desktop.
16. To activate the program, double-click the icon.
The Encoder Division and Main Motor Coefficient parameters must be checked
immediately after the software installation. This is done through the Preferences
dialog box (see the Setting the Preferences section).