User`s manual

Technical Description General Description
3-12 Sprinter User's Manual
The Scraper and Ionizor
The SCRAPER is constantly applied to the SUBSTRATE to ensure that the
S
UBSTRATE is kept free of dirt and dust particles.
The I
ONIZOR is located between the SCRAPER and the STICKY ROLLER. Its
Power Unit is located underneath it, on the inside base of the printer.
It neutralizes electro-static charge from the S
UBSTRATE.
The I
ONIZOR works when a voltage of 24v is present. When possible, the
24v voltage should be turned off. If the voltage is left on unnecessarily, the
Ionizor will leave a mark on the Substrate.
Figure 3-17: The Scraper and Ionizer
The SprinterB PC Control Station
The SPRINTERB PC CONTROL STATION controls all the operation and printing
operations. It is located behind the PC D
OOR (Figure 3-1, page 3-2).
Network
The SPRINTER PC CONTROL STATION controls all the printer's operations.
The computer includes a network card. It is ready to become a station on a
LAN in any environment. It has also an address that is already set so it will
not conflict with any other device on the system.
There are many different networks systems on the market and therefore we
do not configure the computer to any specific system. If the system in the
target customer's place is known when ordering the printer, we can set
and configure the computer to these needs.
If not, than a network technician will have to set the configuration on-site
according to the system used.
Your Systems Administrator who knows the environment well, is
responsible for connecting the printer to the LAN, and not our technician.