User`s manual

Important Notes Getting Started
Sprinter User's Manual 1-3
Important Notes
The following notes should be read carefully.
It is recommended that the operator be fully familiar with the specification and all
sections of this manual. Failure to do so may compromise the warranty and the
accuracy that Matan has engineered into your printer.
After relocating he SprinterB printer to a new location, you must ensure that it is
completely level before commencing work.
When any reference is made to the right or left side of the printer, it refers to the
sides when looking from the front of the printer. That is, when you are facing the
Substrate Collector Cover, with the Controls Cover on your right.
Any machine parts or components located on the right side of the printer, are
accessible only after removing the Controls Cover.
You should use the Around the Windows chapter as your Quick Reference Guide.
This chapter contains an explanation of all the application's main windows and
dialog boxes.
The Operating Procedures described in this manual should be carried out in the
order that they are presented.
The photographs appearing in this manual were taken under factory conditions.
Any objects that may appear, other than those refered to in the accompanying
caption, should be ignored.
In some photographs, for clarity, the printer's outer covers were removed.
You are advised that when changing any worn parts or used materials, care should be
taken to dispose of those parts or materials in the correct manner and, where applicable,
they should be recycled according to local regulations.