User`s manual

Service Plug System Error Messages
Sprinter User's Manual V
Appendix B: Service Plug System Error
Messages
The following is a list of the SERVICE PLUG error messages:
Error Message Reason/Solution
The HASP Key driver has not been installed.
Install the HASP Key driver.
No HASP plug was connected to the parallel port.
Connect the HASP plug to the parallel port.
You have inserted the wrong plug in the parallel
port. (It either does not match the width of the
printer you are using, or Dealer Service plug).
You are trying to enter a license that is already in
use.