User`s manual

Configuring the Software Installing & Configuring PhotoPRINT Server
13-10 Sprinter User's Manual
7. Enter the data as shown above, for each of the four Ink Colors,
remembering to click OK after you complete the settings for each color.
8. From the D
ENSITY ADJUSTMENT drop-down combo box, select NONE,
unless you wish to create your own density profile.
If required, check the P
ERFORM COLOR CORRECTION option.
See the section “Using Color Management and ICC Profiles,” page
13-14.
9. From the C
OLOR MODE drop-down combo box, select CMYK.
10. Click the L
AYOUT tab.
The L
AYOUT tab appears (Figure 13-15).
Figure 13-15: Setup Properties Window – Layout Tab
11. In the DEFAULT JOB SIZE group box, check the SCALE option and set it at
100%.
12. Click the C
OMMUNICATION tab.
The C
OMMUNICATION tab appears (Figure 13-16).
Figure 13-16: Setup Properties Window – Communication Tab
13. Insert the destination path for the saved output files.