User`s manual

Printing from MAC applications (DTP) to PhotoPrint ServerCreating Files for the SprinterB Printer
11-10 Sprinter User's Manual
7. Select the Print option to access the dialog box with the printer (job)-
settings (resolution, rendering intent ,ICC profiles, etc..). In addition
you will be able to determine General settings such as: number of
copies, print from-to and determine PostScript settings related to
PostScript levels, data format, Font inclusion and others.
The font section is very important. Please make sure that all fonts used
in the design Program (i.e. QuarkXpress, PageMaker etc.) are also
available in the PhotoPrint Server. The option “Fonts Inclusion” needs
to be set to “All but fonts in PPD file” in the tab “PostScript setting” as
shown below.
8. Make sure to select “File” instead of “Printer” in the “Destination”
section, if you would like to prevent the job being automatically
processed by PhotoPrint Server (i.e on hold) please click the “Hold”
button in the “After Spooling” section.
9. After you finished defining all settings click Save.
A new dialog box appears.
10. Browse to the shared directory you have already defined as Hot folder
in PHOTOPRINT SERVER (it should be located on the NTFS partition)
and click Save.
Once you click Save, the job will appear in PhotoPrint Server and will
be, (depending on your setting) automatically processed or put on hold,
awaiting further instruction(s).