User`s manual

Sprinter User's Manual 10-1
10 Maintenance
Draining the Air Filter
You must drain the air filter on your own compressor, as well as that on
the printer, every month, to ensure that the compressed air supplied to the
printer is dry.
Figure 10-1: Power Supply Voltage Screw
 To drain the Air Filter:
1. With the air supply turned on, open the drain that is located at the
base of the A
IR FILTER (Figure 10-1).
2. When all the water has been removed from the air supply, close the
drain.
A
ir Dr
a
in
Air In
A
ir Out