User guide

© Copyright Mastip Technology Limited. Information subject to alteration. V1.02 www.mastip.com
6
Temperature ControlleriB6 / iB121.0 Introduction
PV
SP
PV
SP
285
60%
251
250
250
250
250
250
252
250
250
249
285
60%
251
250
250
250
250
250
252
250
250
249
PV
SP
1 2 3 4 5 6 F C
285
60%
251
250
250
250
250
250
252
250
250
249
iB6 Operating Display
iB12 Operating Display
1.1 About this User Guide
This user guide contains all the information needed to configure and operate the iB6 and iB12
Integrated Temperature Controllers.
Wiring diagrams, mounting instructions and other information about installing the hardware are on
the installation diagrams shipped with the unit.
1.2 iB6 & iB12 Features and Benefits
1.2.1 Multi-Zone Control with Convenient User Interface
A single iB6 Temperature Controller can provide microprocessor-based control of up to six zones;
a single iB12 Hot Runner controller can control up to twelve zones. Zones can be configured
individually or all zones can be configured simultaneously.
During operation the front panel simultaneously displays the process value and setpoint for every
zone. LEDs for each zone indicate the type of control (open or closed loop), output status, alarm
status, boost status and standby status. Buttons on the front panel make it easy to change the
setpoint, mode and configuration parameter values for one selected zone or all zones.
The front panel also has buttons to:
• start the boost for all zones,
• put all zones in Idle or all Idle zones in the Run state,
• silence the audible alarm.
When necessary, access to function buttons on the front panel can be restricted.
Refer to Section 7. for details on how to enable or disable functions.