User guide

© Copyright Mastip Technology Limited. Information subject to alteration. V1.02 www.mastip.com
32
Temperature ControlleriB6 / iB12
7.1 Introduction
If you have access to the Superv [Supervisor] Config menu, you can disable any of the following: the
soft start feature (not recommended), boost button , mode button , use of the front-panel
buttons to change setpoints or configuration parameters.
7.2 Procedure
To disable/enable a button or function:
1) Select any zone by pressing .
2) Access the menu system by pressing until a menu name is displayed, and then press
repeatedly until the name of the Superv Config menu is displayed.
3) Step through the parameters by pressing repeatedly until the name of the function you want
to disable is displayed.
4) Choose “Disable” or “Enable” by pressing or .
5) Exit the menu system by pressing and holding until the standard operating display (PV and
SP) is displayed.
7.0 Restricting Functions