Instruction Manual

Mass 24/50, 24/75, 24/100, 48/25, 48/50 – User and Installation Manual
3
1 GENERAL INFORMATION
1.1 Use of this manual
This manual contains important safety and operating
instructions for the safe and effective operation,
maintenance and possible correction of minor
malfunctions of the Mass Charger. It is therefore obligatory
that every person who works on or with this product is
completely familiar with the contents of this manual, and
that he/she carefully follows the instructions and important
safety instructions contained herein.
1.2 Validity of this manual
All the specifications, provisions and instructions contained
in this manual apply solely to standard versions of the
Mass Charger.
This manual is valid for the following models:
Product
code
Model
Enclosure
type
40020506
Mass 24/50-2 230V/50-60Hz
DNV-GL
C2
42020506
Mass 24/50-2 230V/50-60Hz
C2
40030506
Mass 24/50 400V 3 phase
C3
40020756
Mass 24/75 230V/50-60Hz
DNV-GL
C3
42020756
Mass 24/75 230V/50-60Hz
C3
40120756
Mass 24/75 120V/60-50Hz
DNV-GL
C3
42120756
Mass 24/75 120V/60-50Hz
C3
40021006
Mass 24/100 230V/50-60Hz
DNV-GL
C3
42021006
Mass 24/100 230V/50-60Hz
C3
40031006
Mass 24/100 400V 3 phase
C3
40040256
Mass 48/25 230V/50-60Hz
C2
40040506
Mass 48/50 230V/50-60Hz
C3
These models are further mentioned as “Mass Charger”.
Mastervolt offers a wide range of products for your
electrical installation. For an extensive overview of all our
products, please visit our website www.mastervolt.com.
1.3 Liability
Mastervolt can accept no liability for:
• Consequential damage due to use of the Mass
Charger.
• Use that is inconsistent with the purpose of the
product.
• Possible errors in the manuals and their results.
Disclaimer: Our products are subject to continual
development and improvement. Therefore, additions or
modifications to the products may cause changes to the
technical data and functional specifications. No rights can
be derived from this document. Please consult our most
current Terms & Conditions of Sale.
1.4 Identification label
The following picture is only an example!
Part number Serial number K201R0010 with device version “R”
Figure 1. Identification label
The identification label is located at the right-hand side of
the Mass Charger. Important technical information
required for service and maintenance can be derived from
the identification label.
CAUTION!
Never remove the identification label. This will
void the warranty.
1.5 Correct disposal of this product
This product is designed and manufactured
with high quality materials and components,
which can be recycled and reused. Please be
informed about the local separate collection
system for electrical and electronic products.
Please act according to your local rules and do
not dispose of your old products with your
normal household waste.
CERTIFICATES