Product Specifications

Specifications
Specifications battery charger
Battery temperature sensor yes, included
Battery voltage sense yes
General specifications
Status indicator yes, 3-color LED
Output voltage 20-30 V
Nominal output voltage 24 V
Output voltage stabilisation 2 % at extremes of tem-ps, load and input
Output voltage ripple (peak peak) max. 1 %
Max. output power 725 W
Nominal output power 675 W
Max. output current 30 A
Output charge current (3-step mode) 30 A
Nominal input voltage 12 V
Input voltage range 10-16 V
Max. input current 50 A
Galvanic isolation no
Voltage limited yes
Efficiency > 95 % (at nom. input voltage, full load); peak 97 %
Parallel configuration yes
Alarm contact yes, through MasterBus
MasterBus powering no
Engine run signal input yes (active high/active low)
DIP switches yes, for basic setup
Dimensions, hxwxd 255 x 165 x 66 mm
10.0 x 6.5 x 2.6 inch
Weight 2 kg
4.4 lb
Approvals CE, E-mark
Technical specifications
No-load consumption < 2 mA
Charge characteristic 3-step+
Battery types flooded, Gel, AGM, spiral, Lithium Ion, traction, user defined
3-Step charge option yes (DIP switch settings)
DC consumption < 5 mA
Connections 3 x M8 terminal for cable diameters of 10-50 mm², (positive input,
positive output, joint negative connection) 8-pole screw connection for
cable diameters of 0.75-1.5 mm² (remote on/off, temperature sensor,
voltage measurement)
Temperature range (ambient temp.) -25 °C to 60 °C; derating > 40 °C
-13 to 140 °F
Cooling natural cooling
Protection degree IP23
Protections DC short circuit, overload, over temperature, reversed polarity (fuse)
MasterBus compatible yes