Product Specifications

Specifications
Specifications sine wave inverter
Nominal DC voltage 48 V (38-62 V)
Output voltage 180-260 V, adjustable
Output frequency 50/60 Hz (± 0.005 %), configurable
Output waveform true sine
Continuous power at 40 °C / 104 °F, cos phi 1 3500 W
Max. peak load 7000 W
Max. efficiency >= 93 %
Max. ripple on DC (battery at full load) < 5 %
No-load power consumption on DC (ON/inverter OFF/OFF) 26 W / 4 W / 0 W
Energy saving mode consumption 7 W
Parallel configuration yes, up to 10 units (for larger systems, an external transfer system is
required)
3-Phase configuration yes, up to 3x3
Synchronise with mains/generator yes
Specifications battery charger
Input voltage range 184-275 V
Max. input current 16 A
Max. charge current at 40 °C / 104 °F 50 A at 57 V, adjustable
Secondary charger output voltage 12/24 V selectable
Secondary charger output current 10 A
Battery temperature sensor yes, included
Battery voltage sense through MasterShunt, otherwise automatic compensation
Specifications transfer system
AC input (generator) 50 A (switched)
AC input 30 A (switched)
AC output 1 67 A
AC output 2 50 A (switched)
AC input fuse no
Transfer speed seamless (< 1 ms)
Transfer voltage range 184-275 V, adjustable
Transfer frequency range 35-68 Hz, adjustable
General specifications
Galvanic isolation yes
Display/read-out LED display
Dimensions, hxwxd 472 x 318 x 178 mm
18.6 x 12.5 x 7.0 inch
Weight 15.3 kg
33.7 lb
Compliance CE, E-mark, ABYC, RMRS
Technical specifications
Charge characteristic IUoUo, automatic / 3-step+ for Gel/AGM/MLI/ flooded/spiral/traction
Recommended battery capacity ~ 100-300 Ah (based on gel batteries, may differ for other types)
Ground relay yes, configurable
Temperature range (ambient temp.) -25 °C to 60 °C, derating > 40 °C
-13 to 140 °F
Cooling vario fan
Protection degree IP23 (vertical mounting)
Safety class IEC protection class I
Humidity protection conformal coating, max. 95 % relative humidity, non condensing
Protections over temperature, overload, short circuit, high/low battery voltage
Power Assist yes