Product Specifications

Specifications
Specifications sine wave inverter
Nominal DC voltage 24 V (20,4-32 V )
Output voltage 120 V
Output frequency 60/50 Hz (configurable)
Output waveform true sine
Continuous power at 40 °C / 104 °F, cos phi 1 3500 W
Peak power (30 sec) 5250 W
Surge power (5 sec) 7000 W
Max. efficiency 93 %
Battery no-load power consumption 47 W (on mode) / < 1 mA (off mode)
Energy saving mode consumption 25 W
Synchronise with mains yes
Specifications battery charger
Input voltage range 90-140 V
Max. input current 32 A (adjustable)
Max. charge current at 40 °C / 104 °F 100 A at 28.5 V (configurable)
Battery temperature sensor yes, included
Battery voltage sense automatic compensation
Specifications transfer system
AC input 50 A (switched) max
AC output 85 max A
AC input fuse Yes
Transfer speed 10 ms
Transfer voltage range 90-140V
Transfer frequency range 40-65 Hz
General specifications
Galvanic isolation yes
Display/read-out LED display
Dimensions, hxwxd 568 x 359 x 170 mm
22.4 x 14.1 x 6.7 inch
Weight 17 kg
37.5 lb
Compliance ABYC A31, UL1236, UL1741, SAEJ1171
Technical specifications
Charge characteristic UoUo, automatic / 3-step+ for flooded, Gel/AGM and MLI, configurable
Recommended battery capacity 200-1000 Ah (based on gel batteries, may differ for other types)
Ground relay yes, configurable by means of mechanical jumper
Temperature range (ambient temp.) -25°C to 60°C, derating above 40°C, shutdown above 60°C °C
-13 to 32 °F
Cooling vario fan
Protection degree IP23 (vertical mounting)
Safety class IEC protection class I
Humidity protection conformal coating, max. 95 % relative humidity, non condensing
Protections over-temperature, overload, short circuit, high/low battery voltage
Power Assist yes, supports AC input with power from the battery
Power Sharing yes, allows you to select AC Input fuse setting
MasterBus compatible yes
CZone / NMEA 2000 compatible yes