Product Specifications

Specifications
Specifications sine wave inverter
Nominal DC voltage 12 V (10.2-16 V)
Output voltage 120 V
Output frequency 60/50 Hz (configurable)
Output waveform true sine
Continuous power at 40 °C / 104 °F, cos phi 1 2600 W
Peak power (30 sec) 4500 W
Surge power (5 sec) 6000 W
Max. efficiency 93 %
Battery no-load power consumption 30 W (on mode) / < 1 mA (off mode)
Energy saving mode consumption 10 W
Synchronise with mains yes
Specifications battery charger
Input voltage range 90-140 V
Max. input current 28 A (adjustable)
Max. charge current at 40 °C / 104 °F 160 A at 14.25 V (configurable)
Battery temperature sensor yes, included
Battery voltage sense automatic compensation
Specifications transfer system
AC input 30 A (switched)
AC output 55 A
AC input fuse yes
Transfer speed 10 ms
Transfer voltage range wide: 70-140 V / narrow: 90-140V
Transfer frequency range 40-65 Hz
General specifications
Galvanic isolation yes
Display/read-out LED display
Dimensions, hxwxd 448 x 284 x 155 mm
17.6 x 11.2 x 6.1 inch
Weight 9.3 kg
20.5 lb
Compliance ABYC A31, UL1236, UL1741, SAEJ1171
Technical specifications
Charge characteristic UoUo, automatic / 3-step+ for flooded, Gel/AGM and MLI, configurable
Recommended battery capacity 300-800 Ah (based on gel batteries, may differ for other types)
Ground relay yes, configurable by means of mechanical jumper
Temperature range (ambient temp.) -25 °C to 60 °C, derating > 40 °C
-13 to 140 °F
Cooling vario fan
Protection degree IP23 (vertical mounting)
Safety class IEC protection class I
Humidity protection conformal coating, max. 95 % relative humidity, non condensing
Protections over-temperature, overload, short circuit, high/low battery voltage
Power Assist yes, supports AC input with power from the battery
Power Sharing yes, allows you to select AC Input fuse setting
MasterBus compatible yes
CZone / NMEA 2000 compatible yes