Product Specifications

Specifications
General specifications
Output voltage 200/220/230/240 V - 50/60 Hz (selectable)
Output waveform true sine
Nominal battery voltage 24 V
Recommended battery capacity >= 65 Ah
Continuous power at 25 °C / 77 °F, cos phi 1 1000 W
Continuous power at 40 °C / 104 °F, cos phi 1 1000 W
Peak load (1 min.) < 1150 W
Peak load (1 s) < 1750 W
Peak load (3 s) 2000 W
AC connection plug connection EU (Schuko), with UK plug (code 28221000) or with
NZ/AU plug (code 28421000)
Galvanic isolation yes
Efficiency 94 %
Display/read-out LED indication: battery voltage, load level, status
Alarms potential free alarm contact
Dimensions, hxwxd 200 x 372 x 83 mm
7.9 x 14.6 x 3.3 inch
Weight 3.3 kg
7.3 lb
Compliance CE, E-mark, RCM
Technical specifications
Technology high frequency, input & output fully isolated
Low battery voltage, switches off at 21 V
Low battery voltage, switches on at 25 V
High battery voltage, switches off at 33 V
High battery voltage, switches on at 29 V
Input current (nominal load) 50 A
No-load power consumption (ON mode) < 0.8 A
No-load power consumption (energy saving mode) < 0.05 A
Minimal DC fuse (slow blow) 63 A
Minimal cable size 16 mm²
Harmonic distortion typical < 5 %
Cos phi all power factors allowed
Temperature range (ambient temp.) -20 °C to 60 °C, derating power > 40 °C
-4 to 140 °F
Cooling temperature and load controlled fan
Protection degree IP21, horizontal wall mounting
Protections over-temperature, overload, short circuit, high/low voltage, reverse
polarity (fuse)
MasterBus compatible yes, using a MasterBus AC Master Interface