Product Specifications

Specifications
General specifications
Output voltage 230 V - 50 Hz (± 0.1%)
Output waveform true sine
Nominal battery voltage 24 V
Recommended battery capacity >= 30 Ah
Continuous power at 25 °C / 77 °F, cos phi 1 300 W
Continuous power at 40 °C / 104 °F, cos phi 1 250 W
Peak load (5 s) 600 W
AC connection universal
Galvanic isolation yes
Efficiency 91 %
Display/read-out LED display
Alarms 4 alarm modes
Dimensions, hxwxd 210 x 130 x 60 mm
8.3 x 5.1 x 2.4 inch
Weight 1.16 kg
2.6 lb
Compliance CE, E-mark, ABYC A-31
Technical specifications
Technology high frequency, input & output fully isolated
Low battery voltage, switches off at 20 V, ± 0.5 V
Low battery voltage, switches on at 22 V, ± 0.5 V
High battery voltage, switches off at 32 V, ± 0.5 V
High battery voltage, switches on at 29 V, ± 0.5 V
Max. ripple on DC (battery) 10 % RMS
Input current (nominal load) 11 A
No-load power consumption (ON mode) 0.29 A - 7 W
No-load power consumption (energy saving mode) 0.16 A - 4 W
Minimal DC fuse (slow blow) 40 A
Minimal cable size 1.5 metre DC cable delivered as standard
Harmonic distortion typical < 6 %
Cos phi all power factors allowed
Temperature range (ambient temp.) -20 °C to 40 °C, derating > 40 °C
-4 to 104 °F
Cooling natural/forced
Switch off at (auto recover after cooling down) 50 °C
122 °F
Protection degree IP23, vertical wall mounting
Protections over temperature, over load, short circuit, high/low battery voltage
MasterBus compatible no