Installation Manual

ManualsBrandsMastervolt Manuals24V AC to DC Battery Chargers24V-80A-2 ChargeMaster Plus Battery Charger with CZone Integration

ChargeMaster Plus 24/80-2, 24/110-2 – User and Installation Manual

21

6. Select the required Charge

Method from the drop-down

list.

7. Enter an understandable Name

for DC 1 OUT, DC 2 OUT.

8. From the DC 2 Charge Method

drop-down list, select the

required mode for DC 2 OUT.

See section 5.5. Depending on

the selected mode, additional

settings will be offered, hidden

or grayed out.

9. NMEA2000 Instances are used

to differentiate between multiple

monitoring sources.

10. Press OK to return to the

Module Modification window

and press the Alarm/Switch

Settings button.

11. Select the required Alarm

Severities.

12. Press OK.

Optionally configure digital

switching by adding Circuit

Controls in the Circuits tab (e.g. a

battery low switch can be used to

start a generator). Write the

configuration to the network to use

the new configuration.

For more information, please refer to the CZone

®

Configuration Tool Instruction manual.