EASY CHARGE Waterproof portable Battery Charger 1.1 AND 4.3A MODELS USER MANUAL To download this manual in other languages, please visit our website: www.mastervolt.
EasyCharge 1.1 and 4.3A – User Manual CONTENTS OF THE DELIVERY Congratulations for choosing the Mastervolt EASY CHARGE battery charger. Before using, please read the entire manual, in particular the section IMPORTANT SAFETY INSTRUCTIONS. Check the contents for possible damage. Do not use the product if it is damaged. If in doubt, contact your supplier.
EasyCharge 1.1 and 4.3A – User Manual 3 IMPORTANT SAFETY INSTRUCTIONS Read the entire manual before using the charger. Keep this manual in a secure place GENERAL 1 Before using the charger, read and follow the instructions and specifications contained in this user manual and those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of the battery. Review cautionary marking on these products.
EasyCharge 1.1 and 4.3A – User Manual SPECIFICATIONS TECHNICAL SPECIFICATIONS Model Part number: Input voltage: Max. AC input current Protection class: Maximum charge current: Fuse rating DC cable: Nominal battery voltage: Maximum charge voltage: Charge characteristic*: Recommended battery** - Full charge: - Maintenance charge: Battery types**: Dimensions (L x W x D): Weight: Protection degree Ambient temperature: Protections: Conformity: EasyCharge Portable 1.
EasyCharge 1.1 and 4.3A – User Manual 5 BEFORE YOU START FIRST TIME SETUP 1 2 3 4 5 6 7 Determine the battery voltage and type (flooded, Li-ion, gel or AGM) from the information of the battery manufacturer. Determine the average ambient temperature of the battery: is it below of above 10°C / 50°F? Select the required charge mode based on your battery and the Charge mode selection table, and determine the corresponding LED display. Make sure the charger is not connected to mains or battery.
EasyCharge 1.1 and 4.3A – User Manual 1 BATTERY CHARGING OFF Charging can be stopped at any time by disconnecting the mains plug from the wall socket. CHARGING OUTSIDE A VEHICLE 1 2 2 3 Click! 4 3 5 6 4 5 6 Disconnect all loads from the battery. Connect the required cable assembly (either with ring terminals or alligator clips) to the DCconnector. Make sure the connection is secure. Connect the POSITIVE (RED) lead to the POSITIVE terminal (+ pole) of the battery.
EasyCharge 1.1 and 4.3A – User Manual 4 5 6 MAINTENANCE Examine your electrical installation on a regular base, at least once a year. Defects such as loose connections, burnt wiring etc. must be corrected immediately. If necessary, use a soft clean cloth to clean enclosure of the battery charger. Do not use any liquids or corrosive substances, such as solvents, alcohol, petrol or abrasive components.
EasyCharge 1.1 and 4.3A – User Manual TROUBLE SHOOTING If you cannot solve a problem with the aid of this chapter, contact your local Mastervolt Service Centre. If you have to contact your local Mastervolt Service Center to solve a problem, please make sure you have the part number and batch number ready; see product ID-label at the bottom side of the product.
