User Manual
Table Of Contents
- Chapter 1
- Chapter 2
- Chapter 3
- Chapter 4
- Chapter 5
- Chapter 6
- Chapter 7
- Chapter 8
- Edit Setup Mode
- About Edit Setup Mode
- The Parameters of a Setup
- The Zone-specific Parameters
- About Auxiliary Effects
- Common Parameters
- Saving in Setup Mode
- Edit Setup Mode
- Chapter 9
- Chapter 10
- Chapter 11
- Chapter 12
- Appendix A
- Appendix B
The Operating Modes
Functions
5-6
[MIDI Bank number] * 128 + [program number]
So for example, if you want to send to a MIDI Program Change message for Program 83 in
MIDI Bank 4, you would enter the number 595—this number is equal to 4 * 128 + 83.
Demo Function
Pressing the Sound Select E and F buttons simultaneously performs the Demo Function.
Entering this mode, the SP4 will play a built-in demo sequence designed to demonstrate
the capabilities of the instrument. While the demo sequence plays, the display will show the
text “Demo Mode,” and the Sound Select E and Sound Select F button LEDs will blink,
indicating that the instrument is in Demo Mode. Pressing any button will return to the
previous mode.