Use Instructions

Page 44/233

MasterScope - Instructions for Use

Version 03.00 • Date 19FEB2020

2.3 MasterScope User Registration

In order to register site personnel on the MasterScope, the user name must be

entered and at least two different ﬁngers must be registered using the ﬁngerprint

sensor.

The MasterScope User Registration can be started in three different ways:

First, by using the My Study Portal account as described under Online Setup

chapter or by using the SQF PIN as described under the Ofﬂine Setup chapter.

This is the procedure to create new users (also the CRA) on a new conﬁgured

MasterScope system, i.e. if neither the CRA nor any users have been previously

registered.

To login with My Study Portal account, follow the steps 1 to 4 below:

1. User Name: First letter of ﬁrst name + last name (automatically ﬁlled in after the

successful online setup)

2. Enter the password of your My Study Portal account (see online setup chapter).

3. Select either “Subject Mode”, “Proﬁciency Mode” or “Training Mode”.

4. Click <Log In> to continue.

Second, new users can be registered more easily in the CRA’s or site user’s (who

has the respective role to create new users) presence. For doing this, follow the

steps below:

1. Login with the ﬁngerprint sensor. (User who can add new users to the

MasterScope according to their role.)

2. Go to “Tools” on the right menu bar of the system.

3. Click the tab “User Management” in the “Tools” menu.

4. Follow the steps for registering new users as described in the respective chapter

of the Instructions for Use manual.