Use Instructions

Page 32/233
MasterScope - Instructions for Use
Version 03.00 • Date 19FEB2020
If you go to the User Management via the Tools menu and select “Show
deactivated users”, the system will display all users who have been registered for
this site via SQF already. These users were downloaded automatically. Just select
the user who should also get access and click on <Show Details> to add the
fingerprints. There is no need to add them as new users.
If a user is not listed at all, then click on <Create new user>.
Otherwise the system software installation and user registration is complete.
2.2.2 MasterScope Offline Setup
For installing the MasterScope software offline, the following steps need to be
completed:
Step 1: Ensure the setup medium with the most current protocol-specific
software version has been received from ERT.
Step 2: Connect all necessary peripherals to the MasterScope (see Chapter 1.4)
and turn on the MasterScope.
Step 3: Insert the setup medium into the MasterScope laptop computer and
install the software.
Step 4: Register all site users.
Here is the detail description for each offline setup step:
Step 1: Update medium (SD Card or USB Stick)
Ensure the setup medium (SD Card or USB stick) with the most currrent protocol-
specific software version has been received from ERT. Have it ready before
continuing with the next steps.