Use Instructions

Page 229/233
MasterScope - Instructions for Use
Version 03.00 • Date 19FEB2020
Technical Data Ruuvitag Ambient Sensor
Bluetooth: BLE 4.2 factory firmware default protocol
Embedded NFC™-A tag coil
Battery: 1000 mAh CR2477 Li/MnO2 battery included (up to 3 years battery life)
Transport/Storage: Temperature:
Relative Humidity:
Barometric Pressure:
-40 to +85 °C
0% to 95% RH
300 to 1100 hPa
Operating Range: Temperature:
Relative humidity:
Barometric pressure:
-20 to +65 °C
0% to 95% RH (non-condensing)
300 to 1100 hPa
Typical Absolute Accuracy: Temperature:
Relative humidity:
Barometric pressure:
±0.5 °C @ 25 °C (±1.25 °C @ full operating
range)
±3 % @ 20 to 80 % RH and 25 °C
±1hPa @ full operation range
3-axis Accelerometer: 3-axis, ±2 g / ±4 g / ±8 g / ±16 g, 1 to 5300 Hz
Freefall and motion detection
Dimensions: Diameter:
Height:
Weight:
52 mm (enclosure)
12.5 mm (enclosure)
25 g (battery included)
Weatherproof: IP67 certified enclosure
RuuviTag (https://ruuvi.com) is an open-source sensor platform that can measure temperature, relative air humidity,
airpressure and acceleration.
Sensor accuracy information is based on sensor manufacturers’ datasheets and information received
from the sensor manufacturers. It’s not always guaranteed that typical or absolute sensor accuracies
will be met in user applications. The sensor manufacturers state that majority of the sensors do fall
between the typical values informed on the datasheets. However, some sensor components delivered
from the sensor manufacturers’ facilities may still have up to three times worse accuracy. Sensors are
factory-calibrated before assembled. Sensors are 100% tested but not individually calibrated at Ruuvi’s
production line. Operating temperature may have an effect to the battery life. Estimates are at room
temperature (25 °C). RuuviTag is designed for non-condensing use only.