Technical data

MKA4CAT0UKAG4MG/Rev. 1-01/2009
06
6. CONTROL PANEL
7. REAR SIDE
The following figures show different rear Legend: 8. Input power sock et (16A)
1. Communication slot 9. Not controllable output soc k ets (10A)
sides for Series A depending on the
2. Fan 1 0. Fixing point for sliding rail
housing and power ratings.
3. Fan (In other models, only one fan) 11. Controllable outlets (2 groups,10A)
4.
External bat tery pac k connector 12. 16A output sock et
All models include RS232 and USB (HID)
5. RJ11 port for bat tery pac k detection 13. ROO/RPO terminals
communication ports, providing the user
14. USB port
cable
more flexibility in order to obt ain
15. Earth screw
6. RS232 port (DB9)
information regarding monitoring.
7. Input circuit
breaker
There are two controllable outlets groups.
By using them, the user can maximize the
energy usage and prioritize different loads
according to their relevance.
RPO/ROO terminals are very useful to
shutdown / shutdown and restart the unit
remotely, for example when it is difficult
to have access to the UPS.
To
connect the battery extension to the
UPS, the battery cable must be plugged
into the socket and into one battery pack
connector. Besides this, the RJ11 cable
must connect the UPS and the battery
pack for auto detection of external battery
packs.
Series A 3000 RT
MASTERGUARD Series A
UPS from 700 VA to 3000 VA
Front panel with LCD display for tower models Front panel with LCD display for rack/tower models