Use And Care Manual

Page 11
OPERATING INSTRUCTIONS: DRY
VACUUMING
6. Insert the locking end of the hose into the
vacuum port on the power head and screw
in place. Push the desired extension wands
or attachments onto the free end of the
hose. (fig. 6)
Fig. 6
7. Verify that the switch is in the ‘O’ OFF
position before plugging the power cord into
the outlet. (fig. 7 & 8)
Fig. 7 Fig. 8
8. Turn the motor on by flipping the switch to
the ‘I’ ON position. (fig. 9)
Fig. 9
9. Once you have completed vacuuming,
flip the switch to the ‘O’ OFF position and
unplug the power cord from the outlet. (fig.
10 & 11)
Fig. 10 Fig. 11
10. To rewind the cord, hold on to the plug and
press the cord rewind button. Do not allow
plug to whip when rewinding. (fig. 12)
Fig. 12
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR
LIQUID VACUUMING.
DRY VACUUM OPERATION