Use And Care Manual

Page 8
7. For wet vacuum cleaning, install the supplied
foam wet filter. (fig. 8) See page 17 for filter
installation.
Fig. 8
8. Place the power head back on the collection
tank, aligning the top section with the
latches, and snap into place. Keep in mind
the power head should be positioned so
that the blower port is in the rear. (fig. 9)
Fig. 9
9. Insert the locking end of the hose into the
port of the collection tank and lock into
place. (fig. 10)
Fig. 10
10. Choose the desired wands or accessories
and push onto the hose. (fig. 11)
Fig. 11
POLARIZED PLUG
To reduce the risk of electrical shock, this
appliance has a polarized plug (one blade wider
than the other). This plug will fit in a polarized
outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any
way. Double insulation eliminates the need
for the three wire grounded power cord and
grounded power supply system.
GENERAL ASSEMBLY INSTRUCTIONS