Use And Care Manual

ManualsBrandsMasterforce ManualsTools8 Gallon 4.5 Peak HP Wet/Dry Shop Vacuum with Detachable Blower

Page 17

INSTALLING & CLEANING FOAM WET FILTER

Installing Foam Wet Filter

1. Verify that the power cord is disconnected

from the outlet. (fig. 1)

Fig. 1

2. Remove power head and place in upside

down position. Follow instructions to

remove cartridge filter.

3. Carefully slide foam wet filter down over

the filter cage making sure the cage is

completely covered. (fig. 2 & 3)

Fig. 2 Fig. 3

4. Place the power head onto the collection

tank.

Cleaning Foam Wet Filter

1. With the removed power head in an upside

down position, carefully remove foam wet

filter. (fig. 4)

Fig. 4

2. Use a mild soap and water solution to wash

foam wet filter and rinse with clean water.

(fig. 5)

Fig. 5

3. Allow filter to air dry before installing and

using again.