Use And Care Manual

Page 10
OPERATING INSTRUCTIONS: DRY
VACUUMING
5. Insert the locking end of the hose into the
vacuum port on the front of the tank and
lock in place. Push the required attachment
onto the free end of the hose or extension.
(fig. 5)
Fig. 5
6. Plug the power cord into the outlet. (fig. 6)
Fig. 6
7. Turn the motor on by flipping the switch to
the ‘I’ ON position. (fig. 7)
Fig. 7
8. Once you have completed vacuuming,
flip the switch to the ‘O’ OFF position and
unplug the power cord from the outlet.
O = OFF I = ON
DO NOT USE THE CARTRIDGE FILTER FOR
LIQUID VACUUMING.
DRY VACUUM OPERATION