Use And Care Manual
Page 4
does not turn it on and off. Any power tool
that cannot be controlled with the switch is
dangerous and must be repaired.
• Disconnect the plug from the power
source and/or the battery pack from
the power tool before making any
adjustments, changing accessories, or
storing power tools. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
• Maintain power tools. Check for
misalignment or binding of moving parts,
breakage of parts and any other condition
that may affect the power tool’s operation.
If damaged, have the power tool repaired
before use. Many accidents are caused by
poorly maintained power tools.
• Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are
easier to control.
• Use the power tool, accessories and
tool bits etc., in accordance with these
instructions and in the manner intended
for the particular type of power tool, taking
into account the working conditions and
the work to be performed. Use of the power
tool.
SERVICE
• Have your power tool serviced by
a qualied repair person using only
identical replacement parts. This will
ensure that the safety of the power tool is
maintained.
GENERAL SAFETY RULE
ADDITIONAL SAFETY
INSTRUCTIONS FOR YOUR
TOOL
• Hold power tool by insulated gripping
surfaces, when performing an operation
where the cutting accessory may contact
hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make
exposed metal parts of the power tool “live”
and could give the operator an electric shock.
• Use clamps or another practical way
to secure and support the workpiece to a
stable platform. Holding the work by hand or
against your body leaves it unstable and may
lead to loss of control.
DANGER
People with electronic devices,
such as pacemakers, should consult their
physician(s) before using this product. Operating
electrical equipment in close proximity to a
heart pacemaker could cause interference or
failure of the pacemaker. Some dust created by
power sanding, sawing, grinding, drilling, and
other construction activities contains chemicals
known to cause cancer, birth defects or other
reproductive harm.
WARNING
Some examples of these
chemicals are:
- Lead from lead-based paints.
- Crystalline silica from bricks and cement
and other masonry products, and arsenic and
chromium from chemically – treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such
as dust masks that are specially designed to
lter out microscopic particles.
WARNING
Handling the power cord on this
product may expose you to lead, a chemical
known to cause cancer and birth defects or
other reproductive harm. Wash hands after
handling.