Use And Care Manual

Page 11
OPERATION
8. APPLICATION
The workpiece must be clamped tightly before it is cut.
WARNING
The saw teeth are very sharp. Do not touch during mounting and application
NOTE: When plunging and sawing, use a slight pendulum motion, to allow sufcient chip
removal. The saw blade lasts longer if the wear is distributed evenly. To ensure
an even distribution, loosen the saw blade, rotate it and retighten rmly.
Cut/sand with a constant movement and light pressure. Heavy pressure does not increase the
cut/removal rate, the accessory merely wears faster.
Function Accessory Name Application
Sawing
Bi-Metal Metal/Wood
End Cut Blade
Wood,plastic, berglass, nails,
non-ferrous metals, thin sheet
metal, hardened llers
HSS Saw Blade Thin wood, plastic, berglass,
nonferrous metals, thin sheet
metal, hardened llers, window
glazing
Sanding
Sanding Pad Wood, plastic, hardened llers
Scraping
Rigid Scraper Blade Old paint, hardened adhesives,
caulk, carpet