Use And Care Manual

page 14
SPECIFICATIONS
Electrical Circuit
Air Passage Drawing
FIG. 4
FIG. 5
TROUBLESHOOTING
PROBLEM
The compressor doesn't seem
to provide as much air as it did
when new and/or the
compressor cuts off within a
much shorter time period.
The pressure switch needs
adjusting.
POSSIBLE CAUSE
POSSIBLE SOLUTIONS
Stop the compressor and
contact Customer Service
1-866-409-4581.
The motor pump unit does
not stop when the tank
pressure reaches its
maximum working pressure
(75 PSI).
Pressure switch is defective
or needs adjusting.
Stop the compressor
immediately and contact
Customer Service
1-866-409-4581.
The tank is full of water due
to condensation.
Open the drain valve and
release the water from
the tank.