Use And Care Manual

FIG. 11

LED LIGHT SWITCH (Fig. 11)

• To turn the light on, press the light switch (A) to the On (I)

position.

• To turn the light off, press the light switch(A) to the Off (O)

position.

FIG. 12

FREEHAND CUTTING (Fig. 11)

• Lay out desired design, or secure design to the workpiece.

• Raise the drop foot (A) by loosening the drop foot lock

knob (B).

• Position the workpiece against the blade and place the

drop foot against the top surface of the workpiece.

• Secure the drop foot (A) by tightening the drop foot knob

knob (B).

• Remove the workpiece from the blade prior to turning the

scroll saw On.

• Slowly feed the workpiece into the blade by guiding and

pressing the workpiece down against the table.

• When the cut is complete, move the trailing edge of the

workpiece beyond the drop foot. Turn the switch Off.

OPERATION

Page 21

CAUTION: In order to avoid uncontrollable lifting

of the workpiece and to reduce blade breakage, do not turn

the switch on while the workpiece is against the blade.

CAUTION: you do not force the leading edge of the

workpiece into the blade. The blade will deect, reducing

accuracy of cut, and it may break.