Use And Care Manual
WARNING: To avoid injury, do not connect this scroll saw to a power source until it is completely assembled and
adjusted and you have read and understood the operator’s manual.
(ITEMS NOT SUPPLIED)
Phillps screwdriver
(ITEMS SUPPLIED)
5mm Hex key (1 pc)
2.5mm Hex key (1 pc)
UNPACKING YOUR SCROLL SAW
YOU WILL NEED
Do not use this product if any parts of the package contents are already assembled to your product when you unpack it.
Package contents are not assembled to the product by the manufacturer and require customer installation. Use
of a product that may have been improperly assembled could result in serious personal injury.
• Unpack all parts and lay them on a at, stable surface.
• Remove all packing materials and shipping devices if applicable.
• Inspect the tool carefully to make sure that no breakage or damage occurred during shipping.
• This scroll saw is factory set for accurate cutting. After assembling it, check for accuracy. If shipping has inuenced the
settings, refer to specic procedures explained in this manual.
• Do not discard the packing material until you have carefully inspected and satisfactorily operated the tool.
• If any parts are damaged or missing, please call 1-877-684-8912 for assistance.
WARNING: The use of attachments or accessories not listed in this manual might be hazardous and could cause
serious personal injury.
WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any
such alteration or modication is misuse, and could result in a hazardous condition leading to possible serious personal
injury.
WARNING: Do not connect to the power supply until assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
WARNING: Do not lift the scroll saw by the arm that holds the blade. The saw will be damaged.
Page 11
ASSEMBLY
Star-head screwdriver
12mm Open-end wrench or adjustment wrench
Right angle ruler