Use And Care Manual

Page 46
63
95
97
FIG. 27
FIG. 28
6
64
99
94
93
98
96
32
ADJUSTMENTS
• Unlock the fence rails lock lever (32).
• Set the blade at 0° bevel and move the rip fence (6) in until
it touches the blade.
• Lock the fence rails lock lever (32).
• Loosen the rip fence scale indicator screws (93, 94) and
set the red line (95) on the rip fence scale indicator (96) to
read zero.
• Retighten the rip fence indicator screws (93, 94). The top
rip scale reads correctly only when the fence is mounted
on the right side of the blade and is in position screw (63)
(for 0 to 24.5 in. ripping) [not the 32.5 in. position]. The
bottom scale reads correctly only when the fence is mounted
on the right side of the blade and in position screw (64)
(for 8 in. to 32.5 in. ripping).
Adjusting rip fence scale indicator
(Fig. 27)
Adjust the red line on the bevel indicator if it is not aligned
with zero when the blade is perpendicular to the table.
• With blade perpendicular to table, loosen screw (97).
• Set the bevel indicator (98) to align with 0° on bevel scale
(99).
• Retighten screw (97).
Adjusting bevel indicator (Fig. 28)