Use And Care Manual

Page 29

• Push the table saw until the release lever (33) clicks and

locks into place.

• Holding the handles (11) rmly, pull the handles toward

you until the stand and table saw are balanced on the

wheels (9).

• Push the table saw to the desired location, then either open

the stand for table saw operation or store the table saw in

a dry environment.

Moving stand (Fig. 12c)

• Step on the release lever (33) and pull the handles (11)

toward you at the same time.

• Once the stand is released from the release lever, ease

the stand toward the oor by pushing the handles toward

the oor.

Opening stand (Fig. 12d-12e)

FIG. 12b

FIG. 12c

FIG. 12d

ASSEMBLY