Use And Care Manual

Page 20
9
28
ASSEMBLY
• Slide the wheel (9) and at washer 10 (25) onto axle of
lower leg stand assembly (14). Secure with lock hex nut
M10 (28). Repeat for remaining wheel.
• Attach handles (11) to table saw assembly (1). Secure with
hex socket at head screws M8 x 12 (23).
• Push the fence rails lock lever (32) toward the front of the
saw to lock it.
• Grasp the handles (11) and tilt saw back onto wheels (9)
until the stand is balanced on the wheels (9) and rear leg
stand assembly A & B (12,13).
FIG. 2g
FIG. 2h
FIG. 2i
25
23
32
9
13
13
23
14
11
11
9
12
9
11
11
1