Use And Care Manual

ASSEMBLY

Assemble the stand (Fig. 2a-2k)

• Place cardboard or an old blanket on oor in order

to protect the surface of the working table.

• Place the table saw assembly (1) upside down on the

protective material.

• Attach upper leg stand assembly (16) with table saw

assembly (1) with hex bolts M8 x 80 (20), spacers (17)

and lock hex nut M8 (27).

• Attach the limited plate (15) to lower leg stand assembly

(14) with a hex socket at head screw M8 x 50 (21), a at

washer 8 (24), a lock hex nut M8 (27), a hex socket at

head screw M6 x 16 (22) and a hex nut M6 (26).

• Attach the lower leg stand assembly (14) to upper leg

stand assembly (16) with with hex bolts M8 x 80 (20),

spacers (17) and lock hex nut M8 (27).

FIG. 2a

Page 18

FIG. 2b

FIG. 2c