Product Manual

Page 12
Storage
When your cleaning session has been
completed. Turn off the water supply. Pull
the trigger on the spray gun 2-3 seconds to
drain out the excess water and to release any
remaining water pressure. Do not allow the
power cleaner to run with no water flowing
through it.
Remove lance from the gun. store all in the
package.
Make sure to discard any remaining detergent
from the tank. Residual chemical will stick
to the container which could become
contaminated, and can cause the detergent
injector to clog and not function properly.
Flush the tank and nozzle head with clear
water to prevent clogging.
Remove the battery pack.
DO NOT store the power cleaner where
it is exposed to freezing temperatures.
Store the power cleaner indoors to prevent
the water in the unit from expanding under
freezing conditions. When the water freezes
and expands, your power cleaner will be
damaged and become inoperable.
CARE AND MAINTENANCE
FIG.18
FIG.19
TROUBLESHOOTING
PROBLEM CORRECTIVE ACTION
Power cleaner will
not turn on
Check the battery volume by pushing the button beside the power
indicator light. Check the safety lock above your thumb to make sure is
pushed in.
No water come out
nozzle
Make sure when you pull the power trigger, your hand is squeezing the
water trigger at same time. A full self-priming process from empty hose
will take 30 seconds under max mode. If the water inlet hose is connected
with tap water it’ll shorten the time.
The self-priming
is not working
well and the tool
sounds not happy
Make sure the Garden Hose Adaptor is tightly connected with the screen
inside. Push again the connectors on both ends of the hose to the garden
hose adaptor and garden hose filter to make sure they are connected
tightly. The garden hose filter has to be below the water level. Check the
suction height from water source. Remove hose kinks. Clean the water
filter.
Can not get 2X
power mode shift
by double click the
power trigger
Make sure the double click of the power trigger in 0.8 seconds.
If you have any questions regarding the product, please call customer service at 1-866-235-5112
95790_IM_ MFMJ250.indd 12 2020/4/13 下午2:19