Assembly Instructions

Page 6
ATTACH THE
CROSS BRACES
On the front, position one cross brace on
the wood top. Attach using nine M6 x 16 mm
hex bolts. Tighten securely.
Front
On the back, position one cross brace on
the wood top. Attach using nine M6 x 16 mm
hex bolts.
Also on the back, position one cross brace
on the bottom of the frame. Attach using
four M6 x 16 mm hex bolts.
Tighten securely.
Back
ATTACH THE
ADJUSTABLE FEET
Screw the four adjustable feet into the
bottom of the frame.
Turn the workbench upright.
Back
ATTACH THE
CORD WRAP
Position the cord wrap over the holes and
attach with two M6 x 16 mm hex bolts.
TIghten securely.
ASSEMBLY