72" x 24" Workbench Actual product may differ slightly from image shown Model #: 211-4316 OPERATOR’S MANUAL CAUTION: To Reduce The Risk Of Injury, User Must Read And Understand Operator’s Manual. Save These Instructions For Future Reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 2 Safety Instructions...................................................................... 3 Parts List.................................................................................... 4 Assembly.................................................................................... 5 Maintenance and Safety.............................................................
SAFETY SYMBOLS Model #:________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:_______________________ Date of purchase:________________________ Receipt # of purchase:___________________ Do not stand or lean on the worktop. Do not allow children near the unit. Do not lift unit by yourself.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call 1-800-459-4409. 7 6 1 2 5 3 4 Ref# Description Part# Qty 1 M6 x 16 mm Hex Bolt 320327 40 pcs 2 M8 x 85 mm Hex Bolt 321217 8 pcs 3 Washer 324067 16 pcs 4 Adjustable Feet 313068 4 pcs 5 M8 Hex Nut 323150 8 pcs 6 Power Strip 333059 1 pc 7 Cord Wrap 236870 1 pc Give this information for service parts: part number and quantity.
ASSEMBLY ASSEMBLE THE FRAME Lay the wood top upside down on a soft mat for protection. Identify the front and back of the wood top. Note the locations of the holes in the diagram below. Front Slide the lower frames into the upper frames to the desired height. This workbench is adjustable from 32" to 46" high in increments of 1". MAKE SURE THE TWO HOLES IN THE LOWER FRAMES FACE TOWARDS THE BACK. Attach each lower frame using four M8 x 85 hex bolts, eight washers and four M8 hex nuts. Tighten securely.
ASSEMBLY ATTACH THE CROSS BRACES ATTACH THE ADJUSTABLE FEET On the front, position one cross brace on the wood top. Attach using nine M6 x 16 mm hex bolts. Tighten securely. Screw the four adjustable feet into the bottom of the frame. Turn the workbench upright. Front On the back, position one cross brace on the wood top. Attach using nine M6 x 16 mm hex bolts. Also on the back, position one cross brace on the bottom of the frame. Attach using four M6 x 16 mm hex bolts. Tighten securely.
MAINTENANCE AND SAFETY MAINTENANCE Periodically clean the frame and wood top with mild detergent and water. Grease and oil can be removed with most standard cleaning fluids. For safety, use a nonflammable cleaning fluid. SAFETY CAUTION: The maximum product weight, including contents, should be no more than 3000 lbs. WARNING: DO NOT stand or lean on the work top. WARNING: DO NOT mount this product on a truck bed or any other moving object. This may cause personal injury or product damage.
MAINTENANCE AND SAFETY • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help.
NOTES Page 9
72" x 24" Workbench LIMITED LIFETIME WARRANTY MASTERFORCE® workbenches have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2019 Menard, Inc.
