Assembly Instructions

Page 5
NECESSARY TOOLS REQUIRED
FOR A SS EMBLY
• 10 mm socket
• Extension ratchet
• Phillips screwdriver
IMPORTANT: THE UNIVERSAL MOUNTING
SYSTEM ON THIS SIDE CABINET FITS
MOST ROLLING TOOL CABINETS. THE
TOP LID OF THE CABINET MUST BE
MORE THAN 1/2" HIGH AND AT LEAST
24" DEEP.
INSTALL THE HANGER
The hanger will mount on either side of this
cabinet. The side cabinet will also accept
the side handle of your rolling cabinet.
To install the hanger, position it over the
holes in the side cabinet and attach with
the 4 M6 x 16 countersink screws. Tighten
securely.
ATTACH THE EVA PADS
Attach the two EVA pads to the side cabinet
in the locations indicated below.
HANG THE
SIDE CABINET
NOTE: Two or more people may be required
to complete this step.
CAUTION: This product should not be
mounted on an empty cabinet.
Hang the side cabinet on the top lip of your
rolling cabinet.
CONNECT
THE CABINETS
Position the connecting channel on the
back of the cabinets. Attach the connecting
channel to the side cabinet with two
M6 x 16 hex bolts and to the roller cabinet
with one M6 x 16 hex bolt.
ASSEMBLY AND OPERATION