6" Side Cabinet Actual product may differ slightly from image shown. Model #: 245-1988/245-1992/245-1996/245-2000 OPERATOR’S MANUAL CAUTION: To reduce the risk of injury, user must read and understand operator’s manual. Save these instructions for future reference.
TABLE OF CONTENTS Safety Symbols.......................................................................... 2 Safety Instructions...................................................................... 3 Parts List.................................................................................... 4 Assembly and Operation............................................................ 5 Maintenance and Safety.............................................................
SAFETY SYMBOLS Model #:________________________________ CAUTION: 1. Read and follow all safety and assembly instructions before using this product for the first time. 2. Fill in the following information and retain the manual for future reference: Place of purchase:_______________________ Date of purchase:________________________ Receipt # of purchase:___________________ Do not open more than one drawer at a time. Do not step on drawers. Do not allow children near the unit.
SAFETY INSTRUCTIONS The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and the explanations with them, deserve your careful attention and understanding. The symbol warnings do not by themselves eliminate any danger. The instructions and warnings they give are no substitute for proper accident prevention measures.
PARTS LIST For service regarding parts, assembly or warranty information, please call 1-800-459-4409. The keys are taped to the inside of the top drawer of the cabinet.
ASSEMBLY AND OPERATION NECESSARY TOOLS REQUIRED FOR ASSEMBLY • 10 mm socket • Extension ratchet • Phillips screwdriver IMPORTANT: THE UNIVERSAL MOUNTING SYSTEM ON THIS SIDE CABINET FITS MOST ROLLING TOOL CABINETS. THE TOP LID OF THE CABINET MUST BE MORE THAN 1/2" HIGH AND AT LEAST 24" DEEP. HANG THE SIDE CABINET NOTE: Two or more people may be required to complete this step. CAUTION: This product should not be mounted on an empty cabinet. Hang the side cabinet on the top lip of your rolling cabinet.
ASSEMBLY AND OPERATION RAISE AND RELEASE DRAWER FRONTS These units are equipped with the raise and release drawer front system. To open, lift up on the drawer front while pulling out towards you. To close, shut the drawer firmly until the latch engages. If the drawer does not stay closed, the drawer contents may be the obstruction, or the hook may be slightly bent or it may be rubbing up against the drawer slides. To resolve this problem, lightly bend the hook until the drawer engages in the slide.
MAINTENANCE AND SAFETY MAINTENANCE Lubricate the slides twice a year with a product like WD40 or other quality lubricant. This is especially important when the temperature decreases, as the bearing can become stiff. Periodically clean the drawer fronts, drawer trim, and other surfaces with mild detergent and water. Auto wax will preserve the storage unit’s luster finish. Apply the wax as you would to a car. The wax will also help protect the unit against scratches.
NOTES Page 8
NOTES Page 9
16" Side Cabinet LIMITED LIFETIME WARRANTY MASTERFORCE® Tool Cabinets and Chests have been manufactured to the highest standards of quality and workmanship and are warranted to be free from defects in materials and workmanship under normal use for the lifetime that you own the product. If any part of the product is found to be defective during normal use, the defective product or part will be replaced at our discretion.
©2017 Menard, Inc.
