Use And Care Manual

Page 5
NECESSARY TOOLS REQUIRED
FOR ASS EMBLY
• 10 mm socket
• Extension ratchet
• Phillips screwdriver
INSTALL HANGER
The hanger can be mounted on either side of
a tool cabinet. If necessary, remove the side
handles from the tool cabinet.
To install the hanger, position it over the holes
in the tool cabinet and attach using four
M6 x 16 counter sink screws. Tighten
securely.
ATTACH EVA PADS
Attach two EVA pads to the power drawer in
the locations indicated.
HANG POWER
DRAWER
Hang the power drawer on your tool cabinet.
CONNECT POWER
DRAWER TO CABINET
NOTE: Two or more people may be required
to complete this step.
Position the connector on the back of the
power drawer and tool cabinet. Attach to the
power drawer using two M6 x 16 hex bolts
and to the tool cabinet using one M6 x 16
hex bolt.
ASSEMBLY AND OPERATION